Cutting
The raw material from our warehouse is cut in a separate area. For this we are using selection of band saws, circular saws and table shears. The saws feature automatic feeding system and they are able of very productive cutting in high amounts of semi-finished products. The raw material is transported to the cutting area with the use of forklift from the external storage site or the internal raw material warehouse. We achieve accuracy for cutting 1-2 mm.
In the course of cutting, it is possible to change continuously the parameters of the cut as well as check actively the cut perpendicularity in the level of the workpiece. The advantage of the machine is especially its rigid frame enabling high speeds. Max. speed is 120m/min, and max. feed is 250 mm/min. The cut width is of 2-3 mm
Band saw BEHRINGER HBBS 110/60
High performance horizontal band saw with automatic feed. Maximaldimensions of workpiece 1100 x 300 x 4000 mmBEHRINGER HBBS 65/40
The machine cuts with a circular saw blade. It allows to divide material with a maximum thickness of 150 mm and a width of 3000 mm.KASTO CROSS A 4x12 band saw
The machine with automatic feed performs cutting via a circulating band at the workpiece plane, with the workpiece max thickness of 410 mm, and width 1270 mm, the material length is limited to 6 meters.In the course of cutting, it is possible to change continuously the parameters of the cut as well as check actively the cut perpendicularity in the level of the workpiece. The advantage of the machine is especially its rigid frame enabling high speeds. Max. speed is 120m/min, and max. feed is 250 mm/min. The cut width is of 2-3 mm